Installed new CD player/stereo. Works fine, but now a system light flashes.Any help would be appreciated.  

If "SYS" is displayed in the LCD section of the instrument panel cluster after the customer installs a new (aftermarket) stereo, he will need to do the following:

1. Buy (2) 1 kilo-ohm 1/2 watt resistors. [Radio Shack part # 271-023. They sell them as a 2pk for .29 cents.]
2. Disconnect the negative battery cable.
3. Remove the receiver.
4. Connect one end of both resistors to ignition power. (Yellow wire in the car)
5. Connect the other end of one resistor to the purple/white wire in the car.
6. Connect the other end of the second resistor to the grey/black wire in the car.
7. Cover all connections and completely cover the resistors.
8. Reconnect the negative battery cable.


Hope this helps?  

Thanks for the help.R  

Also have a '92 coupe. It has a "Blows" system. I was looking for an after market replacement that fits and looks good. May I ask what you used?

TIA, Dave