I am looking for a c3 corvette project for my three sons to finish, around $10,000. thanks!  

hello   I have an 82 corvette that up until two weeks ago just needed some TLC.  The crossfire is acting up an I am getting agravated with it.  I came to this site for help to meet the crossfire gods.  After I spend a few more $$$ and a couple of beers this car might be the car you are looking for.  I had it for a year and has been fine but now I am pulling whats left of my hair out.

shortckt  

I have a 1976 that might fit the bill. It is an L82 with 154K miles, but it has been maintained in good condition. I have owned the car since 1980 and have replaced many parts just recently. It could use a fresh paint as it has been a daily driver up till a couple of years ago. It has been garage kept the entire time I have owned it. The engine was rebuilt several years ago and bored 0.030" over, with Crane Cam, Edelbrock Intake, Hedmon Headers, and functional Sidepipes installed. It is Red with Automatic/PW/PS/PB/Tilt Tele/T-Tops and Leather interior. I replaced the sidepipes, battery, front carpet this year, and all the seals 3-4 years ago. I installed an '82 nose and tail when I had it repainted in 1988, original color. It has never been wrecked, either by myself or the previous owner. Now the down side, I had the car for sale a couple of months ago and was driving it around the block and threw a rod in the engine. I am about to pull the engine and rebuild, but if you want to do this I would knock off the price accordingly. I have photos if you are interested.  

I have a 1975 corvette that will be under $10,000. It needs a little work but I have done some things to it already. Let me know if interested.  

I recently purchased a 79 that had been parked since 81. I have installed Performer intake, Holley 600 w/electric choke. New Hei, new tires, battery plugs, wires, changed oil, and tranny oil, and filter replaced all four calipers. Car runs great have driven two time less than total of about 5 miles. Getting ready to buy whole new interior, and motors for windows.  Odometer reads less than 26k original miles. I knew the guy that had this car. It is in Texas. Let me know if interested.  

I HAVE A GREAT 72 PROJECT FOR SALE AND 10g IS RIGHT ABOUT WHAT I WAS LOOKING TO GET. THE COUPE IS COMPLETELY STRIPPED AND DISASSEMBLED AND i HAVE SPENT 3-4 YEARS HUNTING FOR NOS OR NEAR NOS PARTS FOR THE REBUILD. tHERE IS NO MOTOR OR TRANNY, YOU CAN PICK THE DRIVETRAIN BUT NEARLY EVERYTHING ELSE IHS HERE FOR IT. CENTER AND SIGNAL GRILLS, ROCKER PANELS, LIGHTS, LENSES, CHROME TRIM BADGES, NUTS , BOLTS, SCREW, GUAGES, CONSOLES...i HAVE A ROOM FULL OF PARTS IN BOXES READT TO GO AND MULTIPLES OT SOME ITEMS TO RESTORE. 714-693-7130
RON  

Sir,
I know you are looking for a C3 Corvette. I know of a great project car. It is a 1986 Black Corvette. Has a 406 EFI engine, with the pizza box intake($1000 on the net alone Rare intake 20 hours to port and fit to engine)AFR heads(ported), long tube headers, flowmasters, Brand new (not rebuilt) 700r4 transmission. Has Vortex ram air intake also. Car runs mid 11's with a 3.08 gear. Yes a hwy gear and runs mid 11's on motor. No juice. Car is from AIRFLO Technologies, was his R and D car. Needs paint and interior cleaned up(new but sitting in the sun). I believe he also has another rear end and new MT slick on rims. Asking about $6500 for it. Would make an awesome street car or strip car. Could not build the engine for what we wants for the whole car. My number is 754 224 8298 if you want his number, Thank you Anthony